Waste scrap Tire Rubber Crusher Machine For Sale

Tire shredder in various shapes and sizes, each manufacturer's appearance design have distinguishing feature each, but according to the actual production requirement, specific requirement, torn the interior of the tire shredder knife roller are basically divided into four, respectively is: uniaxial knife roller, biaxial knife roller, four axis knife roller, coarse crushing knife roller. So we can put the tire shredder is divided into four categories: single shaft crusher, biaxial crusher, four shaft crusher, coarse crusher.

Product introduction:

The rubber Crushing Machine consists of one crushing machine, cyclone separator, electric control cabinet and water supply mechanism. The rubber crusher is mainly used for processing rubber powder from waste tires.

Tire crusher is mainly used for grinding tires, wire tires, steel wire tires (radial tires) and various waste rubber products or scraps, making it into rubber powder, and reach the required fineness (mesh number).

Rubber shredder tire crushing machinery and equipment features:

Rubber shredding machine tire crushing machinery equipment by box, motor, industrial gear box, six arris spindle, imported cutter, bottom cutter, frame, bearing box and other main structures.
1. Thick and heavy moving knife, high crushing efficiency, the cutter is cast by alloy steel, strong and long service life.
2. Thick frame plate, high torque resistance, very strong.
3. Adopt microcomputer (PLC) automatic control, set up start, stop, reverse and overload automatic reverse control function.
4. The equipment has the characteristics of low rotation speed, large torque, low noise and dust which can meet the environmental protection standards.
5. Easy to adjust, low maintenance cost and economical.

Working principle of rubber shredding machine tire crushing mechanical equipment:

The main shaft is supported by two ends of bearings. The motor is transmitted to the main shaft through the gear box. The rotating main shaft drives the helical cutting tools. The electric control part is equipped with a reverse automatic control device to overcome the major technical problems of the machine. In order to improve the service life and cutting ability, the spindle and cutter are tempered and tempered.

Structure principle:

A complete set of tire crusher production line is used to deal with waste tires and miscellaneous rubber at room temperature. The equipment is equipped with air and water cooling system, micro dust removal device, atomization spray system, etc. In addition, it can also independently dust removal fiber equipment according to users' special raw materials.
Abrasive type tire crusher is now the best choice for small investors, with small investment, low cost, large income, simple operation, save time and effort, energy saving and environmental protection characteristics! The head of the grinder is equipped with a water tank, and a small amount of circulating water is used for cooling.
Tyre crusher contains 3 sets of decomposition processing equipment: strip cutting machine, ring cutting machine and block cutting machine;
5 grinding equipment: crusher, magnetic separation and conveyor, grinding machine, vibrating screen, feeder;
Steel wire and rubber powder magnetic separator 1 set and other components.

Advantages of parameters:

Low energy consumption, fine particle size, high efficiency, simple operation and no pollution.

Safety rules:

1, after starting, for the machine to run properly,  allowed uniform continuous feed crops.
2, pay attention to the speed of the motor, when working  voice and the temperature of the bearing.
3. When feeding, the operator should stand on one side of the feeding mouth, tighten the sleeves of the clothes, and wear a mask and working cap.
4, feeding, attention should be paid to inputs if there is a stone inside, sickle,  tools with hard objects, such as screw, in order to avoid damage to the machine and cause accidents.
5. No belt hanging, oiling, cleaning and troubleshooting are allowed when the machine is running.
6, found the following problems should be shut down the engine, stop processing, motor smoke, crush quality is not good, bearing overheating, more than 60 degrees.

Strictly prohibited items:

1. It is strictly forbidden to peep into the machine from the upper part of the broken cavity during operation.
2. electrical equipment should be connected to the ground, wire insulation should be reliable and installed in the steel pipe laying.
3. It is strictly forbidden to move or remove materials directly by hand in the crushing cavity behind the feeding port during operation.
4. the mill in the operation of any adjustment, cleaning or maintenance work is strictly prohibited.

Investment prospects outlook:

With the rapid development of China's automobile industry, China has become the world's second largest tire producer, the annual production of waste tires has exceeded 112 million, about 3.2 million tons. And double-digit annual growth, growing "black pollution" of the already fragile ecological environment in our country, at the same time, the service life of tires is limited, the discarded waste tires don't melt or refractory polymer elastomer material, have very strong thermal, mechanical and corrosion resistance, very difficult to degrade, one hundred are in effect in the ecological environment, causing serious pollution. Such "black pollution", if not treated early, will cause great harm to the environment.

Since the 1970s, in order to effectively eliminate "black pollution", countries around the world, especially European and American countries, began to recycle used tires and try to make fine rubber powder processing technology of scientific research and development. Fine rubber powder made from waste tires can replace some raw rubber, which is a precious secondary resource, and is the best way to deal with "black pollution" in a harmless, resource-based and industrialized way. Recycled rubber powder can be used in the production of tires and other rubber products, and it has a wide market in the fields of modified asphalt laying highways, railway and subway sleeper heat, playground track, leak-proof and seepage-proof materials, building materials, rubber and plastic products and so on.

In our country, annual consumption of raw rubber 3.45 million tons, 60% of the need to import, since 2002 has exceeded the United States for three consecutive years to become the industry rubber consumption country. With the rapid development of the economy, the anti-restriction effect of resources on the economy is becoming more and more serious. There are major challenges. This gruesome malignant at present, the domestic many people constantly campaigning, find a can solve the problem of the pollution of the environment of the tire, and can be a huge waste tires into the road of sustainable economic development of renewable resources are available, at home, using waste tires is made into fine powder has a very wide range of "potential" for excavation, its extension application and further processing can form a sunrise industry booming, become a new economic growth point, at the same time, will give China's transportation, chemical industry, building materials and other related industry brings a revolution in the cost. To sum up, waste tire recycling industry will have great market development potential, so the use of tire crusher processing rubber powder meets the requirements of sustainable development of the real economy

Pre-sale:
(1) selection of equipment type.
(2) Design and manufacture products according to the special requirements of customers.
(3) training of technical personnel for clients.
(4) The company plans the site for the user free of charge, designs the suitable process and the plan.
On sale:
(1) acceptance of the product.
(2) assisting clients in the preparation of construction plans.
After sale:
(1) assign special after-sales service personnel free of charge to guide customers to install and debug.
(2) installation and debugging of equipment.
(3) on-site training of operators.
(4) after the installation of the complete set of equipment, the full-time technical personnel may assist the customer in on-site production until the user is satisfied.

Contact us if you need more details on Scrap Rubber Crusher Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Waste Tire Rubber Crusher Machine、Rubber Crusher For Sale. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Crusher Machine > Rubber Crusher